Double Glazing Door Locks
Many homeowners opt for double-glazed windows and doors for their energy efficiency, insulation, and sound reduction. However, they are also an effective deterrent for burglars.
Verify that your double-glazed windows have anti-jemmy hinges to increase their security. These hardware parts are specially designed to make it difficult to open the sashes of your windows open.
Multi-point locking
Multipoint door locks are among the most effective security devices you can put in at your workplace or in your home. They are virtually impossible to break or pick, and they can be an ideal addition to any security system. They can also increase your energy efficiency by reducing drafts around the doorframe and improving the seal.
Multi-point locking systems consist of a deadbolt, live bolt and hook bolts located above and beneath the latch. They also have flush bolts which lock into the door's head and the sill. They generally extend most of the time, but not all across the length of the door. These systems are often referred to as "full-width", in commercial contexts. They protect the entire opening of the door.
Multi-point locking is a feature on most uPVC and some timber doors. This kind of lock provides a much higher level of security than standard locks and will often be specified as part of a police-approved Secured by Design initiative for new construction homes.
When a multi-point lock made of uPVC door is closed, the outside handle activates the latch bolt. The inside handle can be locked by turning the thumbturn on the inside while the door handle is raised or using the lock key. You should always use keys to lock your door once it's closed. Attempting to use a lever or deadbolt bolt with a handle may damage the lock and the hinges.
If your uPVC lock isn't working correctly, it could be that it is not aligned with the frame of the door. You can check by placing a spirit level on top of the doors and looking for gaps in the miter joints.
If you notice an opening you're looking for, contact your double glazing specialist to look at the issue and resolve the issue. They'll be able to replace the lock for you or install a new one. They'll be able to tell if it's caused by damage to the frame or the lock unit. In these cases the technician can repair or replace the multipoint lock in order to make it work again.
Espagnolette locks
Espagnolette locks are one of the most common window locking mechanisms for modern uPVC double glazed windows. They are easily recognised by their flat strip design which moves as you turn the handle. They work with multi-point locks that are placed around the frame of your window to secure the window and lock it. If you're seeking to improve your uPVC windows, handles made of espagnolette are a great option for either new builds or renovations. They are available in a broad range of styles, including period and contemporary. They also have a wide variety of bar sizes and backset options, as well as mushroom cam heights and a variety of profiles to suit any application.
While they are a popular choice however, espagnolette locks have also been criticized for providing inadequate security for French doors. A single locking point located in the middle of the door can be easily accessed. It is also possible for thieves to open French doors by pushing the handle to the right or left. These doors are usually used as a principal entrance to your home and should be kept secure to minimise the risk of unwanted entry.
The espagnolette lock does not function as bolt-like, but is it is a single-piece mechanism that can be fitted externally to the edge of French doors or internally to the frame of a casement. The mechanism is operated via a handle and comprises of a rod that has hooks at the head and sill that fit into sockets in the window frame. When the handle is turned the rod is moved up and down and the hooks are locked into their receivers to lock and unlock your windows.
These are a great solution for those who want to increase the security of their French doors without compromising the aesthetics of the door or the overall design of the room. The handles are available in a variety of styles and are able to be master-keyed for extra peace of mind.
Just like cockspur handles, espagnolette handles are available in both cranked and inline models to fit the shape of your window. Inline versions turn in the same direction as the original. Cranked versions are available in left- and right-handed options.
Laminated glass
It is often used for windows because it is very difficult to break. It is also much safer than regular glass since it is fused into a single piece of safety glass, rather than breaking into sharp fragments. This makes it ideal for residential and commercial buildings.
Lamination is a process that involves the joining of two pieces of flat glass with a plastic interlayer between. The entire piece is heated before being pressured to make it stronger enough to be used as an entrance or window. The resulting laminated glass is five times stronger and 100 times more rigid than tempered glass. It also can endure more severe impacts, and resist weathering.
This kind of glass is ideal for construction sites that require high performance like increased safety (impact resistant glass) and UV protection, as well as noise reduction. Laminated glass can be paired with a high-performance coating in order to improve thermal insulation as well as solar control. It's available in a wide range of options to suit your budget and project.
Unlike tempered glass, laminated glass can be cut following production and remain safe to use. It is less likely to break if it's cut from the back of the glass, rather than the edge. This makes it an excellent choice for glass that won't open or close like cellar windows.
It can also be used to reduce the noise that travels through high-rise structures. The Saflex PVB layer within the laminated glasses is also able to block harmful sun ultraviolet radiation. This prevents discoloration of furniture, fabrics and other objects.
Although laminated window lock repair cost is more expensive than tempered glass, it offers many advantages that can reduce your costs over time. It's also more robust, resistant to abrasion and scratches, and can be made to your exact specifications. In addition, it's less susceptible to heat damage, and is an ideal choice for coastal areas and high-rise buildings. In fact, certain building codes require that all exterior doors as well as some interior windows are made of laminated glass.
Friction hinges
Friction hinges are designed to hold and support the position of doors or flaps, panels and windows. They can also resist other hinges' motion and prevent slamming hard as well as accidental closing and opening. They are available in various dimensions and shapes, and are able to have a variety of torques. These forces determine the length of time that hinges remain open or closed.
Aluminum is a fantastic material for friction hinges because of its durability, corrosion resistance, and high strength-toweight ratio. It is lightweight and easy to handle. It is also able to be made into a range of finishes and is easy to install and repair. Another popular material for friction hinges is brass. Brass is an alloy of zinc and copper, and it is naturally resistant to corrosion. It is also stronger and more durable than steel, but it is more expensive.
The friction hinges used in uPVC doors with double glazing are able to be customized depending on the purpose for which they are intended. These customizations may include the amount of damping, the viscosity of the lubricant and the amount of space tolerance between components, as well as the conditions in which the hinge will be used. These variables can affect the dynamic torque of hinges. It is essential to be aware of the metric when in critical applications.
There are many different types of friction hinges, including one-way and detent. One-way friction hinges are characterized by constant torque in one direction, while detent friction hinges don't have any torque in the opposite direction. Other variations include discs, pipe and curl friction. Every type of friction hinge is distinct and comes with its own set of properties, which make it more or lesser useful for specific applications.
The hinges that are friction are commonly called 'free stop' hinges, because they allow doors or lids to remain at a fixed angle after the force has been removed. This prevents injuries by preventing accidental closing. This kind of hinge is perfect for use in medical, tough or dangerous areas. The hinges can be set to provide different levels of free play and are able to function at a variety of angles.